|
Assemble the frame |
|
Before you start the assembly of your new greenhouse it is very important that you read the assembly instructions carefully. |
|
|
|
|
|
| The frame is packed in a box (some models in several boxes) Before you unpack them please check that you have the right parts. |
Start by assembling the gables Lay the parts on the ground before you put them together to get an overview. Put the parts together following the order shown in the assembly instructions. |
|
|
|
|
|
| Put the gables to a side once they are assembled. | Assemble the sides the same way as the gables. | |
|
|
|
|
| Assemble the sides and gables on a level foundation. When they are assembled lift them up onto the base. If you do not have enough space to assemble the greenhouse, you can assemble directly onto the base. It is a good idea to loosen the bolts in the gable when you fix it to the sides. In this way the corners will be correctly assembled. |
If you have bought a Juliana steelbase, you must fasten the greenhouse to the base using j-plates. The small bow are pushed under the base and fastened to the greenhouse bolt through the long hole. If you have a concrete or wooden base, the greenhouse must be fasten to it with a screw for every section in the greenhouse. |
|
|
|
|
|
| Now assemble the ridge. Loosen the bolts in the top of the gable, to make assembly easier. | The roof profiles are assembled. Remember to add extra bolts, where you want to mount the windows. |
|
|
|
|
|
| Now its time to assemble the windows. With the Premium model you assemble the windowframes around the glass or polycarbonate. With other models you assemble the windowframes, and mount them in the greenhouse before you install the glass or polycarnonate using silicone. |
The hinges of the windows are pushed into the ridge from the end and pushed into position. It will move more easily if you oil it. |
|
|
|
|
|
| Now it is time to put the door together. The profiles are laid out to get a nice overwiev, before you assemble it. The Premium door is assembled around the glass or polycarbonate. With other greenhouses the door is assembled first and then the glass or polycarbonate is installed using silicone. |
Before you assemble the door, window and glass/polycarbonate it is very important that you ensure your greenhouse is level. Further it is important to measure from one corner to the oposit corner to ensure that the greenhouse is in 90 degrees angle. |
|
|
|
||
| Mounting the greenhouse door. Now install the glass or polycarbonate. |
